Wednesday, December 4, 2013

Cold temps, calm water, a couple trout

Salmon fishing is done, the weather has calmed down and the water was calling me and my boat to come play.  The action today was not lights out, but it wasn't bad as I fished new(to me) water and let the crab pot soak as I played around with a Hagen's Hoochie Mama spinner and a few willing biters.

To start with, Katie and I were cruising around the KP a few weeks ago and while taking back-roads found a previously unknown to us boat ramp on the east side of the KP, which happens to be a short jaunt from Wycoff Shoal and pretty good crabbing.  I decided I would try out this new ramp and as it turns out, just as the other ramps on the KP this one has been redone and is in really nice shape and has a pretty gradual slope, the tide was at about 7' at low, so I can't speak to whether it goes to a 0' tide level or not, but if it's like the Vaughn ramp, my suspicion is that it does.

At any rate, after a successful but rusty(it's been a couple months) launch, I was off to crab and spin for SRC's.  I dropped my pot off near the shoals with some pretty damn stinky Dover sole that was mis-rotated at work and was salvaged by me to use for crab bait. Then I cruised over near McNeil island to a very fishy looking point off the island that was on the leeward side of the tide flow.  It was a bit more sandy of a bottom than I like to fish, but I saw a lot of holes from the bottom dwelling shellfish that are a good indicator of a productive SRC beach and decided to stick to it and just float along the shore with the tide as I fished the whole stretch of beach.

I hooked on my favorite color pattern, nightmare(black, red, and white) and began to cast.  The Hi-Laker has a seat up in the bow and when I'm by myself I like to either(barring calm seas) stand on that and cast or the bench seat as I can get a good vantage point up higher.  And let me tell you, it's pretty awesome to watch your offering get followed by a cruising trout or better yet slammed by a torpedo of a trout shooting in from nowhere.  So after a few casts I had one cruiser follow my offering until it got close to the boat and he darted off.  I had one hook up after a few more casts and he shook the hook loose within a few good fits of pissed off rage.  Things died down for a bit as I continued to drift along and cast.  Then things got really interesting, a massive trout came out of nowhere as I was retrieving, unfortunately when he struck, he didn't hook.  This fish could have gone 18 inches, it was a pig!  I tried to cast in the direction he fled to, but couldn't get him to take again.  Would have been fun for sure!

I continued to drift along to a small cove and managed to land two nice 12+" trout as they were showing themselves on the surface.  This would turn out to be the only two fish I would land today, but the action was good, considering I only fished for 2-2.5 hours.  I did end up getting one good Red Rock Crab on the day.

Saturday, September 7, 2013

Sekiu

It's been quite sometime since I've written on my blog, but life has a way of keeping you from things that aren't all that important such as writing things in a diary fashion on a webpage that anyone can read...

Nevertheless, I have a few minutes and would like to document the most recent trip to Sekiu I took with the wife and father-in-law, I know it's not about SRC's, but it's fishing, I like to do it, so I'm going to write about it.  Sekiu is one of those towns that if there aren't fish, there aren't people.  We expected a zoo like the last time we were up there, don't get me wrong, there were people, but it was not; jamb packed hard to find a spot to park your rig busy.  We wondered if there were fish, we would soon find out.

Katie and I always like to leave after work the night before a camping trip, we both work swing shift and it's always nice to have the road to yourself when you are towing a 5th wheel, especially up and down those hills on the OP.  So we got packed up and left around midnight, we had a fairly uneventful drive and pulled off the side of the road about 30 minutes outside of Sekiu to sleep and drive the last 30 minutes in the morning.  We got to Olson's Resort around 9 or 10 in the morning, squated on a spot with full hookups and got camp setup.

Jim towed the boat so we got that loaded and into the water.  We were ready to fish.  What would follow were 2 1/2 days of solid fishing.  Katie and I both got our first Coho salmon, we had to weed through a lot of wild fish, but we ended up coming home with 8 fish, 4 silvers and 4 pinks.  We used the Hi-Laker and I will go into detail about the Hi-Laker as the days come.

Tuesday was by far the best day of fishing, we had double digit hookups, lost count actually, but the fishing was HOT.  We had some confusion the first day about wild fish and pinks, so we let a lot of wild pinks go as we thought if they had a fin, you could not keep it.  But we soon learned our error in our ways and started loading up the stringers.  The nice part about the weekend was that none of us so much as touched a cut-plug herring, all our fish were caught on hardware, the hot setup for myself was a 0/0 dodger with an army truck Coho Killer four times the dodger's length behind it.

I was also able to fish my cutthroat rod as I recently put a manual downrigger on my boat, that made for a very fun day of fishing on light gear!

Saturday, April 13, 2013

Not much happening lately

Not to assume that I have any followers, but sorry I've been absent lately... I have been extremely busy at work and outside of work, and time for fishing has been limited.  However, I was able to pick up a small boat recently.  Found a great deal on a 12' Hi-Laker, no motor though.  Which is not such a bad thing because I already had a 30# thrust Minn Kota in the garage, so all I needed was a battery.  Wal-Mart helped me solve that issue without bending me over too bad.

I took her for a maiden voyage at Trails End Lake where Katie's family has property, it's a no motor lake so perfect for what I was doing.  It's always quiet aside from the seemingly non-stop construction that is going on around the lake.  WDFW planted some lunkers in here in the end of March so I thought I would try my luck.  I didn't have any...  Trolled for a couple hours without a bite, saw plenty of sip rises, but no bites.  I saw probably a 4# fish clear the water on several occasions without any interest in what I had to offer... What a prick...

Overall I loved the boat, cant' wait to find a small motor to plop on the back so I can get out on the salt and catch some Cutties!  One nice thing is it only weighs a couple hundred pounds so It's super easy to load and unload.  And you don't even know it's behind the truck when you're towing it.

Until next time...  Fishing is supposed to be fun.

Friday, March 8, 2013

Early March SRC fishing

It's been a while, crap weather and getting my butt kicked at work have kept me off the water as of late.  I had a three day weekend this week and took the first two days to recover, cabin fever hit me the third day, the chores were getting done and I needed some casting practice.  I headed in the direction of Olalla, not to my normal haunts, and ended up at Anderson Point County Park.  I have been here several times before, but not to fish, mostly with the significant other and the dogs.  The only bummer with this spot, especially with the way I fish (run and gun, no fish, find another spot) is that the walk down is quite far, lots of beach once you get there, but the hike is substantial.  There was not much wind when I showed up, but as never fails, the wind kicked up a bit once I started fishing... irritating to say the least when you are trying to throw light gear.  I suppose the wind was a good thing as it cleared out the clouds and I got some sun on my back as I fished.  I spent almost an hour and a half here, much longer than I like to in one spot.  One other thing against me at this spot... harbor seals... I knew as soon as I saw them there would not be any willing biters in the area... but I continued to fish, there was a nice tidal rip across the point that sticks out here and I was actually able to swing my spinner as I would in a river, as a result I lost one trying to stay too close to the bottom... *sad face* No big deal aside from the time I took to make it, much cheaper when you make them yourself.

I packed it in and started my hike back up the hill, on my way I did see some nettles, but had no means of harvesting or storing them.  I've been wanting to use them at work soon, but my main patch is not sprouting yet.  Perhaps I will return for them...

I made my way towards downtown Gig Harbor to a small park area that used to be the Gig Harbor ferry terminal back in the day.  It's a small stretch of beach at the mouth of the bay, good tidal flow.  During salmon season there is a lot of boat traffic in and out of the harbor, but today none to speak of while I fished.  I have caught fish here before, but was not so lucky today.  I packed it up after a short while and headed home.

No fish today, but the weather ended up clearing nicely and the water was calm.  If I had planned better perhaps I should have gone steelheading, but longer commute and more gear to gather...  I do have some prawns that I cured in BorXoFire and have been thinking about trying them under a float for SRC... not sure how it will work as they are more of a predator, not a scavenger...  I will try it one of these days and let you know.  I did, one day, slap them onto my hook of my spinner as I was out on the kayak, it did increase dramatically my amount of follows in, but they just don't want to stay on those Siwash barbless hooks during casting and retrieving.  It's a work in progress, but part of the way I fish is light gear, less gear, so perhaps the more I have the worse off I am.  I'll probably just save them for the big searun 'bows.

Tuesday, January 15, 2013

Just got home from North Bay on Case Inlet.  The tide was on the incoming swing and the sun was close to setting over Allyn. I wanted to try a couple new colors of spinner that I made last night. The one that caught this bruiser was Gold blade, Orange beads, Red/Grey hoochie.  I knew as soon as this one was hooked it was a good sized fish.  Of course I was wading out a bit and had left my net on the shore so it was a bit tricky getting back to shore to get the net and not lose the fish.  I didn't have a tape to measure the fish with, sure wish I did, it took up the whole net across as you can see.  It went from corner to corner as you can see in the 3rd picture, I'm going to estimate this fish at or around 15" since the net goes 13" corner to corner and the net was bowed out and the tail was still past the corner a good ways.  Most definitely by biggest SRC brought to hand to date.





























I would like to take this opportunity to do a quick review of my latest rig for shore fishing SRC's.  I got a bit of Christmas cash and was able to make it down to Cabela's when they had all their rods and reels on sale before the new stock comes in for spring.  I posted previously about my Okuma SST rods and how they had butt sections that were too long for my liking, still great rods in their own respect, but just didn't suit my needs/wants.  So I have been casually seeking out a long light action rod with a short butt section, many times of which I was told would need to be custom made to my specifications, and that = $$$ to me...  Long story short, my patience paid off and I got almost the exact rod I have been looking for.  After checking out all the rods at Cabela's, yes all of them... I found a 7'6" Cabela's Pro Guide Ultra Light.  It's got a short butt section that only goes about 2/3 the way down my forearm, perfect for fishing from the kayak, plenty of backbone to fling a 1/2 oz spinner about 75' from shore.  To pair with the rod I picked up a Cabela's Pro Guide 2500 spinning reel, pretty sweet reel with a 6.2:1 ratio and 10 ball bearings, had it loaded with 6# Trilene at the store.  The whole setup only cost about $75.  The rod has plenty of back bone and felt great with this fish hooked up.  The reel is pretty dang smooth and the higher gear ratio is nice.  I have no complaints.

Monday, January 14, 2013

Hagen's Hoochie Mama Lures

I don't know if I have mentioned before, but I do make my own spinners for SRC's and have had some pretty good success with these.  My girlfriend Katie has come to affectionately call them Hoochie Mama's.  I originally started fishing with size 3 Vibrax spinners and got tired of having to switch out the treble hooks for single siwash hooks to comply with local Fish and Game laws.  I also got tired of paying almost $4 per lure.  Besides, it's much more fun to catch a fish on a lure you designed yourself, and if there's not a color I want to fish on the shelf of the store, I can just put it together myself!  So with a combo pack of beads, pliers, some pre-made wire shafts, clevises, blades, weighted bodies, swivels, hooks and hoochie skirts I can put together several lures in short order for much less money.  I have some pictures below of one of my lures so you can visualize what I am talking about, these may seem big for trout lures, but they catch fish from 6"s to 2#'s thus far.  SRC's don't seem to care about the size of their quarry, they attack anything with reckless abandon if it looks good.  My theory on why these work; The spinner is a classic trout lure and I had some success with the spinners, but once I added the hoochie skirt and the swivel hook I added more attraction and they can't seem to keep away from these lures.  I think the more it pisses them off the more likely they are to strike!

Here a large view of the lure you can see each component clearly

Here a closeup of the front half of the lure, the black bead at the front acts as a bearing for the clevis, as do the red beads, but the theory behind red is to simulate bloody gills, then the lure body, here a 2/5 oz black nickel body, then the chosen main color bead, usually to accent the color/s of the hoochie.

Here the second half of the lure, the beads as mentioned before, then the hoochie (with the nose cut off to slide up the lure) slid over top the last bead to keep it in place, under the hoochie is the final end loop of the lure to which is attached a barrel swivel to the hook, barbless of course. 

Guided Drift Boat Trip Native Steelhead


Above is a video that I took of my dad bringing in a nice hen steelhead this past weekend.  He was nice enough to spring for a trip for my birthday present this month.  It was generally a slow day of fishing, went 1 for 6, lost a nice one at the boat and finally landed this one in the afternoon.  We did land a bonus SRC in the morning.  We pulled plugs and did some boondoggin' with eggs, the water was very cold and the fish were pretty lethargic.

We couldn't ask for better conditions, had about 3 inches of rain earlier in the week and I knew the river would be in ideal shape.  We woke to temperatures in the low 20's and a nice steelhead green color in the water with about 4-6 foot of visibility.  The water was very cold and made the fish quite lethargic, even a few of our plug bites were lazy and missed 2 hookups because they didn't hook themselves.  I expected the bite to be a bit better once the sun hit the water and warmed it up a few degrees, but it was pretty much the same as the morning bite.  I have never fished the boondogging style, I've side drifted before but not with a bobber as we did this weekend, it was tougher than I imagined it would be, I kept wanting to jerk the rod back to set the hook, and had to miss a few bites before I learned to just reel on the fish, not jerk the rod.  Most of our action came on plugs, so we finished the day out by pulling plugs.  Just to top off the day as we were pulling out a 35"er was landed by another boat, beautiful buck with nice red sides.

The hatchery program for steelhead has been discontinued on this river a few years ago, but there were still a few hatchery fish and other boats had a few here and there, but this is now mostly a wild fish river.  It is still open after mid February to keep a wild fish a year, but hopefully they discontinue that rule now that the hatchery program has been discontinued.  These fish need every advantage they can get to make it to spawn and to keep their progeny coming back year after year.  I can understand the want to take home that 20+ pound fish, but look at it this way... How rare are those fish?  Pretty dang rare, and for every 20 pounder that is taken out of the river it takes those genes and the chance of other 20 pounders from coming back in the future.  Are you taking that fish just to take it because it's the fish of a lifetime?  What are you going to do with it?  Eat it?  Mount it?  Hatchery fish are there for the taking and eating, keep all those you want!  Take measurements and plenty of pictures and get yourself a fiberglass mount made, don't get a skin mount made. Ever seen an old skin mount?  They look horrible...  Ever seen a fiberglass replica?  They look brand new with some minor upkeep.  Take the Elwha for example:  This river used to be known for it's 100 pound Kings, they had to make it up big falls and the only fish that could do it were the big fish.  They got fished out and now there aren't any 100 pound fish because the dams were put in without passage and no fish needed to make it up the falls anymore.  Same concept with the big steelhead, catch and release, enjoy the experience, talk about and enjoy it.  Let someone else have that same experience...

I was unable to land any fish this weekend, but had a good time nonetheless.  The weather was awesome, cold, but there was very little wind, no rain and plenty of sunshine to warm our bones.