Tuesday, January 15, 2013

Just got home from North Bay on Case Inlet.  The tide was on the incoming swing and the sun was close to setting over Allyn. I wanted to try a couple new colors of spinner that I made last night. The one that caught this bruiser was Gold blade, Orange beads, Red/Grey hoochie.  I knew as soon as this one was hooked it was a good sized fish.  Of course I was wading out a bit and had left my net on the shore so it was a bit tricky getting back to shore to get the net and not lose the fish.  I didn't have a tape to measure the fish with, sure wish I did, it took up the whole net across as you can see.  It went from corner to corner as you can see in the 3rd picture, I'm going to estimate this fish at or around 15" since the net goes 13" corner to corner and the net was bowed out and the tail was still past the corner a good ways.  Most definitely by biggest SRC brought to hand to date.





























I would like to take this opportunity to do a quick review of my latest rig for shore fishing SRC's.  I got a bit of Christmas cash and was able to make it down to Cabela's when they had all their rods and reels on sale before the new stock comes in for spring.  I posted previously about my Okuma SST rods and how they had butt sections that were too long for my liking, still great rods in their own respect, but just didn't suit my needs/wants.  So I have been casually seeking out a long light action rod with a short butt section, many times of which I was told would need to be custom made to my specifications, and that = $$$ to me...  Long story short, my patience paid off and I got almost the exact rod I have been looking for.  After checking out all the rods at Cabela's, yes all of them... I found a 7'6" Cabela's Pro Guide Ultra Light.  It's got a short butt section that only goes about 2/3 the way down my forearm, perfect for fishing from the kayak, plenty of backbone to fling a 1/2 oz spinner about 75' from shore.  To pair with the rod I picked up a Cabela's Pro Guide 2500 spinning reel, pretty sweet reel with a 6.2:1 ratio and 10 ball bearings, had it loaded with 6# Trilene at the store.  The whole setup only cost about $75.  The rod has plenty of back bone and felt great with this fish hooked up.  The reel is pretty dang smooth and the higher gear ratio is nice.  I have no complaints.

Monday, January 14, 2013

Hagen's Hoochie Mama Lures

I don't know if I have mentioned before, but I do make my own spinners for SRC's and have had some pretty good success with these.  My girlfriend Katie has come to affectionately call them Hoochie Mama's.  I originally started fishing with size 3 Vibrax spinners and got tired of having to switch out the treble hooks for single siwash hooks to comply with local Fish and Game laws.  I also got tired of paying almost $4 per lure.  Besides, it's much more fun to catch a fish on a lure you designed yourself, and if there's not a color I want to fish on the shelf of the store, I can just put it together myself!  So with a combo pack of beads, pliers, some pre-made wire shafts, clevises, blades, weighted bodies, swivels, hooks and hoochie skirts I can put together several lures in short order for much less money.  I have some pictures below of one of my lures so you can visualize what I am talking about, these may seem big for trout lures, but they catch fish from 6"s to 2#'s thus far.  SRC's don't seem to care about the size of their quarry, they attack anything with reckless abandon if it looks good.  My theory on why these work; The spinner is a classic trout lure and I had some success with the spinners, but once I added the hoochie skirt and the swivel hook I added more attraction and they can't seem to keep away from these lures.  I think the more it pisses them off the more likely they are to strike!

Here a large view of the lure you can see each component clearly

Here a closeup of the front half of the lure, the black bead at the front acts as a bearing for the clevis, as do the red beads, but the theory behind red is to simulate bloody gills, then the lure body, here a 2/5 oz black nickel body, then the chosen main color bead, usually to accent the color/s of the hoochie.

Here the second half of the lure, the beads as mentioned before, then the hoochie (with the nose cut off to slide up the lure) slid over top the last bead to keep it in place, under the hoochie is the final end loop of the lure to which is attached a barrel swivel to the hook, barbless of course. 

Guided Drift Boat Trip Native Steelhead


Above is a video that I took of my dad bringing in a nice hen steelhead this past weekend.  He was nice enough to spring for a trip for my birthday present this month.  It was generally a slow day of fishing, went 1 for 6, lost a nice one at the boat and finally landed this one in the afternoon.  We did land a bonus SRC in the morning.  We pulled plugs and did some boondoggin' with eggs, the water was very cold and the fish were pretty lethargic.

We couldn't ask for better conditions, had about 3 inches of rain earlier in the week and I knew the river would be in ideal shape.  We woke to temperatures in the low 20's and a nice steelhead green color in the water with about 4-6 foot of visibility.  The water was very cold and made the fish quite lethargic, even a few of our plug bites were lazy and missed 2 hookups because they didn't hook themselves.  I expected the bite to be a bit better once the sun hit the water and warmed it up a few degrees, but it was pretty much the same as the morning bite.  I have never fished the boondogging style, I've side drifted before but not with a bobber as we did this weekend, it was tougher than I imagined it would be, I kept wanting to jerk the rod back to set the hook, and had to miss a few bites before I learned to just reel on the fish, not jerk the rod.  Most of our action came on plugs, so we finished the day out by pulling plugs.  Just to top off the day as we were pulling out a 35"er was landed by another boat, beautiful buck with nice red sides.

The hatchery program for steelhead has been discontinued on this river a few years ago, but there were still a few hatchery fish and other boats had a few here and there, but this is now mostly a wild fish river.  It is still open after mid February to keep a wild fish a year, but hopefully they discontinue that rule now that the hatchery program has been discontinued.  These fish need every advantage they can get to make it to spawn and to keep their progeny coming back year after year.  I can understand the want to take home that 20+ pound fish, but look at it this way... How rare are those fish?  Pretty dang rare, and for every 20 pounder that is taken out of the river it takes those genes and the chance of other 20 pounders from coming back in the future.  Are you taking that fish just to take it because it's the fish of a lifetime?  What are you going to do with it?  Eat it?  Mount it?  Hatchery fish are there for the taking and eating, keep all those you want!  Take measurements and plenty of pictures and get yourself a fiberglass mount made, don't get a skin mount made. Ever seen an old skin mount?  They look horrible...  Ever seen a fiberglass replica?  They look brand new with some minor upkeep.  Take the Elwha for example:  This river used to be known for it's 100 pound Kings, they had to make it up big falls and the only fish that could do it were the big fish.  They got fished out and now there aren't any 100 pound fish because the dams were put in without passage and no fish needed to make it up the falls anymore.  Same concept with the big steelhead, catch and release, enjoy the experience, talk about and enjoy it.  Let someone else have that same experience...

I was unable to land any fish this weekend, but had a good time nonetheless.  The weather was awesome, cold, but there was very little wind, no rain and plenty of sunshine to warm our bones.

Friday, January 11, 2013

Finally got out!

Haven't posted in a while, the weather hasn't really cooperated until recently. My father-in-law has been in town, so we took Wednesday afternoon after house chores to do some fishing. We hit Penrose about an hour after the swing, not much action, but I did hook into a pig of a trout, probably would have gone 2# easy. Played it to shore and amongst all the excitement and fumbling for the net he shook the hook loose! Damn barbless, oh well, I always say, I like fishing barbless because it gives the fish a fighting chance. That was our only action of the day. Caught him on a spinner I put together, nightmare pattern, black blade/body, red beads, white hoochie skirt. Also finally found a long rod with a short butt section at Cabela's all their rods are on sale right now, 7'6" ultra light, quite pleased with it so far.  Headed to Forks tonight for a guided Steelhead trip in the morning, super stoked for this one, just had all that rain to bring the fish in, now the cold clear water has got it on the drop, should be epic.

Neat link

Fishing Checklist

Here is a neat link I came across today. It's pretty general, but it's a good base list to start off from each time we go fishing. Especially handy to run down a checklist on those early mornings when the brain is still a bit foggy and coffee hasn't kicked in yet.